How To Hook Brake Pedal To Car Horn (Prank)
With this step-by-step guide, you will learn how to hook the brake pedal to the car horn for a classic prank.
There are times when the impulse to carry out a well-natured prank is so strong that it is impossible to resist. This is true whether it is April Fool’s Day, a birthday, or just a regular Tuesday occurrence. A classic example of a practical prank is to wire a friend’s automobile in such a way that the horn would sound whenever the buddy presses the brake pedal. It is essential to keep in mind that safety is the most important thing to keep in mind before you begin to play this classic prank on someone’s driving routine. You should only play this prank on someone willing to accept it in good spirit and a secure atmosphere.
With the help of this detailed guide, we will walk you through the many stages of this prank, making sure that you do not encounter any obstacles along the way. Consequently, fasten your seatbelts and get ready to bring some harmless fun into the day of your buddy or acquaintance.
A Few Things to Think About Before You Launch:
- Acquire Permission: Before interfering with the vehicle of another person, it is imperative that you first acquire permission from that person. Respect is of the utmost importance, yet surprises may be a great pleasure.
- Take precautions to ensure that the prank will not put the driver, passengers, or other people on the road in a dangerous position.
- Be Aware of the Local Laws: In certain areas, you may be breaking the law if you interfere with the operation of a vehicle, even if it’s only for fun. You must ensure that you are not violating any laws.
Instruments That You Will Require
- A set of screwdrivers
- Tape used in electrical work
- A few feet of wire with a gauge that is identical to the wire on the horn
- Strippers and cutters for wire
- Optional multimeter (optional)
In a short amount of time, you will be able to rig the horn if you have the appropriate equipment and a little bit of knowledge about automobiles.
Step 1: Access the Wiring
You will first need to get access to the wire that is located under the dashboard. To expose the brake pedal assembly and its wiring, you will need to remove any panels that are required using a screwdriver. Be careful not to do any harm to any of the components while you are doing this.
AutoZone has provided a helpful guide that explains how to explore the interiors of automobiles.
Step 2: Locate the Brake Light Switch
It is common practice to position the brake light switch near the top of the brake pedal. When the brake pedal is pushed, it is the component that is responsible for turning on the brake lights. You must connect your wire to this switch to activate the horn.
Step 3: Identify the Wire Colors
Finding the positive wire, which is most likely the one that goes to the brake lights, is the next step once you have located the switch for the brake lights. If you are unclear, you should consult the handbook that came with the vehicle or an online forum that is particular to the make and model of the automobile. To choose which wire to focus on, this wiring guide from The12Volt might be of tremendous assistance.
Step 4: Cut and Strip the Wire
Make sure you cut the brake light wire with extreme caution using your wire cutters. Both ends of the wire that has been cut, as well as one end of the extra wire that you have brought along, should be stripped. Note that this step will momentarily turn off the brake lights of the vehicle; thus, you must move quickly to successfully carry out the prank.
Step 5: Connect the Wires
From this point on, the fun can begin. Make a connection between one end of the extra wire and the side of the brake light wire that has been severed and is heading to the brake lights. Make sure that this connection is secure by taping it using electrical tape. The other end of this extra wire will be connected to the horn of the vehicle.
Step 6: Locate the Horn Wire
Locate the horn of your vehicle by looking under the hood. In most cases, it will have the appearance of a disk or a little trumpet, and it will have at least one wire linked to it. This is the wire that you will be connecting to the extra wire that is flowing from the brake light switch throughout the process.
It is possible that a pinout diagram can save your life if you are having trouble determining which wire is the proper one.
Step 7: Make the Connection
It is important to avoid any heated or moving components under the hood while you are running the extra wire from the brake pedal up to the horn. If you have wire strippers, you may use them to splice the end of this wire with the wire that is already on the horn. However, keep in mind that this is just a temporary hookup, so make sure the connections are solid and tight using electrical tape.
Step 8: Test the Setup
Before putting everything back together, it is time to conduct tests. With the engine turned on, have someone gently push the brake pedal to check whether the horn makes a honking sound. If necessary, make the necessary modifications. After you have made sure that everything is functioning properly, carefully rebuild the dashboard and conceal any wire that is exposed.
Step 9: Surprise and Reveal
Now that the prank has been put in motion, all that is left to do is see the response of your buddy as they unknowingly serenade every stoplight and stop sign that they come across. Seize the moment (in a secure manner), and be ready to have a nice laugh with someone.
Step 10: Restoring the Damage
As is the case with any excellent practical joke, it is vital to restore the car to its previous state as quickly and completely as possible. To connect the brake light switch wire again, you will need to reverse the step that you went through before to remove the extra wiring.
A Word of Caution
Even though playing pranks may inject a burst of fun into an otherwise mundane day, it is important to constantly keep in mind the possible consequences. How a car owner reacts to unanticipated events that involve their ride is unique to each individual. It is also important to put a stop to the joke before getting on the road to guarantee everyone’s safety.
If any issues develop, or if you are not sure of your abilities to carry out this prank in a safe and right manner, it would be prudent to obtain assistance from a skilled mechanic, or even better, choose a less technical joke.
The Final Steps
For those of you who are looking for the ultimate automotive joke, here is a step-by-step instruction that will show you how to link a brake pedal to a vehicle horn. Tell us about it in the comments if you’ve been able to effectively wire up the laughter of your audience! Furthermore, it is important to remember that your automobile antics should always be lighthearted and within the law.